Skip navigation

Open Source Hardware

2 Posts authored by: balearicdynamics Top Member


Posted by balearicdynamics Top Member Dec 23, 2015
A project born around the LinkIt ONE board is an experiment of a full open hardware and open software untile to reach a product.   Hugo A dog-wearable device for dogs, that remain more than one day in standby mode. This IoT device is based on the OSHW board LinkIt ONE and following the same philosophy also the device has been developed through three different prototypes as OSHW and OS software device. At the actual date Hugo, as shown in the video below, is a full working small product t ...
Introduction Aiming to develop an advanced Linux server for a private network, with reduced size and a relatively small payload, the choice has been focused on the Gizmo2 board hosting a Debian Linux distribution: A reliable board at a reasonable cost with good performances Availability of 1Gb network connection Availability of 2 USB3 ports Internal SSD connector Good power consumption optimization Open source hardware Availability of accessible GPIO ports and possibility to control the h ...

Filter Blog

By date: By tag: