Skip navigation
EA LPC11U37H Board with ulinkplus debugger in KEIL uVision   The (EA) Embedded Artists OM13074 LPCXpresso LPC11U37 board has been used for tests here. As one can see this board also has another version OM13062 which is sold by NXP and not EA.   In the EA LPC11U37H LPCXpresso Board Schematics I checked that the board is supported by 10-pin, 0.05" SWD connector. The pinout for the SWD connector can be seen in the first page of the blog. This board is powered by USB and ARM ulink plu ...
Measurements with ULINKplus debugger and EA LPC11U37H Board Debugging using SystemViewer Windows Debugging using the Logic Analyzer Debugging with System Analyzer in Cortex M0 Performance Analyzer in KEIL MDK Professional ITM and DWT trace debugging Power Measurements with ULINKplus debugger and EA LPC11U37H LPCXpresso Board Measurements with ULINKplus debugger and EA LPC11U37H Board MDK Ver 5 uses software packs to support a micro-controller device and to use middlewa ...
The list of issues to be considered when using ulinkplus debugger together with KEIL MDK.   The ARM ulink plus debugger is very new in the market and it seems many development boards are not 10 pin SWD connector compatible with the new debugger, specially the old boards. For old boards which are supported by 20 pin connector a mini- translator is needed. It also does not support many of the new families of ARM devices such as XC800, µPSD, XC166/XE166/XC2000, LPC950 (8051), ARM7 and ...

Filter Blog

By date: By tag: