Skip navigation

RoadTests & Reviews

3 Posts authored by: anuag_ashim
The Drawing Robot from Arduino Engineering Kit   Currently dealing with the technical programming issues... tbd.... ...
The previous blogs are here MyIoT: Infineon Shield2Go Boards for IoT - Review Here I present some results from the tests of the Wemos D1 mini Wifi module. This is a common module which is used with many IOT products and very cheap to buy. It is a mini wifi board with 4MB flash based on ESP-8266.   The features of wemos are   11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.2V max input) a Micro USB connection Compatibl ...
This is part 2 from the blog MyIoT: Infineon Shield2Go Boards for IoT - Review   Here I will explain in detail about the tests I performed with the Infineon Shield2Go boards and the sensors. After setting up the Arduino IDE for the XMC_BOOTKIT and XMC2GO micro-controller and installing the libraries needed to work with the S2Go sensors I made a simple setup to test the S2Go sensors.   Blinking LED Test on XMC1100 Boot Kit Blinking the LEDs on the XMC2Go board Testing the S2 ...

Filter Blog

By date: By tag: