Skip navigation

RoadTests & Reviews

1 Post authored by: weiwei2
I use an Arduino Mega ADK with a dated can bus shield v1.1   the can bus shield library is downloaded from https://github.com/Seeed-Studio/CAN_BUS_Shield the i modify the example received_check , to change the pin to 10 instead of the original 9 const int SPI_CS_PIN = 10;   this will shows init success on Arduino serial monitor.   In picoscope       i actually try to add another channel, but unsure why the CAN low cannot decode any signal. i decide to fi ...

Filter Blog

By date: By tag: