Skip navigation
Back to the Primary Blog Post for the Modular Bench Power System The Modular Bench Power Supply ++, The Essential DIY Build for Every EE Student and Old Timer alike...   I recieved a few notes regarding the rather poor response times my DC load was achieving so I decided to have a go at improving things   after tuning a few caps etc on the circuit I now have 50uS or so rise and fall times with a 1A shift in load on a power supply, I have also managed to reduce the ringing quite a bit ...
Back tot he Main Modular Bench power System Project The Modular Bench Power Supply ++, The Essential DIY Build for Every EE Student and Old Timer alike...   I keep promising myself I will build an Electronic DC Load and have kept defering it, well no longer, I finally ot it designed and tested on a breadboard and will be following up with a completed unit in a project case   It can go way above 30V (60 to be precice and upto 5Amps), the MOSFET I used the IRFP064 is able to go to 70Am ...

Filter Blog

By date: By tag: