If you have a card working with RPi 2 and Piface 2, do not use the same sdcard for the othe combination pg B+ amd Piface 2 because of Anyone got PiFace Control & Display 2 working with RPi 2 Model B?
The reason is "A5 Device Tree - which I disabled", needs to be re enabled.
Many thanks. Unfortunately I should test this "detail" later as another more serious issue rises now. As I solve it - supposing - it is the worth I put a note on the Raspi blog. Stay in touch!
Done, first of all
@clem57 solved the other issue (due my stupid mistake) and now finally restored the PI. It was the problem of the tree, now it works find on the model B (that is its destination)
Just to know if someone has already experienced this kind of issue:
- Last update raspian on PI B+
- PiFace Display2 tested on the device (works fine on PI 2)
- All the other parts works fine
Instead the display is 100 unresponsive and when I launch any test from the command laine I receive a message of "internal error" and the program stops. Nothing is shown on the display.
If someone has already experienced something similar and has some check / test to see what maybe wrong (sure it is software) let me know.
Thanks in advance.