1 2 3 4 117 Replies Latest reply on Jan 9, 2019 12:50 PM by ashjones Go to original post
      • 15. Re: Cool Tools To Giveaway for a Blog Review

        My most useful tool is my Wera 18 Piece insulated interchangeable screwdriver set.


        Screwdriver set


        Comes with a selection of flat blades, Philips, Pozi, Philips/slotted, Pozi/slotted and winged, triangle and square panel door keys. All clip into the insulated handle. Even comes with one of those pesky neon screwdrivers. Everything fits into a neat little tool roll.


        Tool roll 1 Tool roll 2

        This lives in a tool case I have for protection relay testing along with all the test leads, switches and resistors used when testing.


        For my overalls pocket, I always have a pen style door key, that has an interchangeable flat blade and Philips bit.


        Pen style cabinet key

        As per a few others on here, I too have a good selection of tools, so can miss out on this road test, unless you are in the strange position of struggling for volunteers.


        Kind regards

        8 of 8 people found this helpful
        • 16. Re: Cool Tools To Giveaway for a Blog Review

          Milwaukee and Leatherman are used a amongst the electrical fraternity in the UK. Milwaukee make some very good professional battery power tools used a lot by domestic electricians.


          Leatherman multi-tools are common to a few trades, to just carry around in their pocket.


          Kind regards

          4 of 4 people found this helpful
          • 17. Re: Cool Tools To Giveaway for a Blog Review

            Wera 18 Piece insulated interchangeable screwdriver set.

            I have a Wiha 3809 with interchangable bits inside the handle.


            It's handy but I find the end a bit large in some situations.



            I'd be keen to try out the Milwaukee Tool 60-piece Shockwave Series Impact Driver Set

            I have a couple of other interchangable bits, but the quality is certainly not there.


            My tools range from electical and automotive thru to mechanical engineering (I have the others, but I'm missing a TIG Welder if you have one to test)


            My philosophy with tools is to always buy the most expensive version you can afford (without paying inflated prices).

            As you use tool/s you'll find you use they get used more often, and the last thing you need is a worn out one at that critical moment.

            Replacing substandard tools costs more in the long run, so avoiding it in the first place is always cheaper.



            I'm not sure I have 'cool' tools ... most are either essential, or I've found them to be useful, so I've purchased them.

            Some were deliberately purchased for one time use, and I spoke to one builder who priced his jobs to include battery powered drill, trimsaw, etc and then left it with the homeowner afterwards. It saved him on worn out batteries etc that slowed down the job or added unwanted frustration.



            Not having the right tool often adds unnecessary time and frustration, which isn't what you want.




            4 of 4 people found this helpful
            • 18. Re: Cool Tools To Giveaway for a Blog Review

              I feel the same.. it is nearly always regrettable buying a cheap tool.

              I recently picked up a hot air tool, because the old one went kaput. The new one is several times the price of the old one, not extreme top-end but it is far better quality, and hopefully isn't going to fail on me for a while.

              Also I've been doing a lot of cable stuff recently (thin coax and chassis wiring crimping type stuff), so I'll hopefully write up a mini report soon about what tools I'm finding useful these days in that area. There is a trade show where I'll probably need to do last-minute wiring, so I'm only taking lightweight, compact tools in the luggage.

              3 of 3 people found this helpful
              • 19. Re: Cool Tools To Giveaway for a Blog Review

                I have the same model and same vintage - it has seen yeoman duty - a very high value purchase.

                • 20. Re: Cool Tools To Giveaway for a Blog Review

                  My Mitutoyo caliper is indispensable - definitely high up the favorites list.

                  • 21. Re: Cool Tools To Giveaway for a Blog Review

                    Another set of very important tool set for me. Not very expensive and does the job quite well.




                    4 of 4 people found this helpful
                    • 22. Re: Cool Tools To Giveaway for a Blog Review

                      My favorite tool is a Victorinox Forester knife. Victorinox has many models with different tools, but I got this one about 15 years ago. Still works flawlessly. I can't count how many times did I use it to cut, open, screw or unscrew anything. At home, in the nature, in a car, I can't really remember all the places I used it at. My variant has a Phillips screwdriver instead of the corkscrew (I don't drink wine, but I work with screws every day).

                      Special occasions require special tools, but this really help to solve many situations quickly. I also appreciate the secured blade, so it can't close itself during cutting.


                      I try to live by the "Reduce, Reuse, Recycle" rule and I have to say, this tool will not even get to the Reduce point I am sure my grandchildren will be able to use it (if there will be any).


                      Victorinox Forester knife


                      If I could choose, I would be interested in testing the ESR meter. I started reading How to Diagnose and Fix Everything Electronic by Michael Jay Geier and he claims that ESR meter is one of the most essential tools in repairing electronics. I never had one, so this could be a chance to prove the claim



                      6 of 6 people found this helpful
                      • 23. Re: Cool Tools To Giveaway for a Blog Review



                        We are ordering my tools to give away on Monday.



                        3 of 3 people found this helpful
                        • 24. Re: Cool Tools To Giveaway for a Blog Review

                          My favorite tools are the ones that I have performed modifications on. When you twist a tool to your own purposes you make a special bond with it.



                          Here are three of the tools which I have modified to do special jobs. The old crimp tool has been fitted with a couple of special wedge blades which allows me to open a connector on a Cavitron handpiece cord so that the wiring can be repaired. Since the new cords cost about $300 the ability to repair them is always appreciated. The channel locks have special blades attached that allow them to be used to operate the chucking mechanisms of dental turbines outside the normal handpiece housing.  The nose of the vise grips has been modified so that one nose is round and tapered and the other nose is concave and clamps down on the round nose. This tool is used to repair round tubing ends that have been bent or damaged so that they are no longer round. These modifications were made to fit specific needs. They are just the opposite of the little kits with attachments and blades to fit all applications as they are focused in one one specific application.



                          7 of 7 people found this helpful
                          • 25. Re: Cool Tools To Giveaway for a Blog Review

                            I started with 'making'(tearing down) stuff at a tender age and have gone through a lot of stuff. Unfortunately, I lost a big chunk of my tools in a burglary years ago and am left with only a large hammer that my grandfather gave me.(Yea he was bold to give a 10 year old a heavy piece of metal )


                            My current tool box itself is something I am quite happy with. I did it as an upcycle challenge but never got around to posting it. Here is a few pics.

                            As you can see, it has cardboard boxes for drawers and small boxes for all the tools and bits.

                            There is a bit of wire going around (initial photo up-top) with space for the Tenma Soldering StationTenma Soldering Station and lots of space at the back for other tools


                            Some LED panels with a 555 for PWM brightness control is used to illuminate the desk.

                            And yes... it is actually my old Desktop cabinet which still has the floppy drive in place. I am quite happy with the final thing which can be customised every now and then to keep things fresh.

                            5 of 5 people found this helpful
                            • 26. Re: Cool Tools To Giveaway for a Blog Review
                              Gordon Margulieux

                              Ah tools!!! And the search for the right tools has been going on since the first human smashed 2 stones together.  We all have our “special” implements of construction or, in some cases, destruction.  For those in the western United States, there is the California screwdriver (i.e. a hammer). For myself, I always carry with me a Leatherman and a Swiss Army knife, except when I fly or entering a federal building.  And I have the holes in the back pockets of my jeans to prove it.  Nothing fancy (my tools, not the holes), but enough to get the job done.


                              Many of the tools mentioned are great and I even have some of them, but here’s a few I have found useful.


                              1. Wearable magnifying lens – Not just because I’m getting older, but in part as circuit components get smaller, I find having a pair of wearable magnifying glasses/lens is very helpful.  The glasses free up your hands for working on your project.  The magnifying lens helps in identifying components and defects, as well acts as a safety shield.  You can find glasses with various options (i.e. glass vs plastic lens, lights, varying magnification, etc.) and price ranges.  I bought my current pair at a local discount store for under $10 US.  They offers multiple power plastic lens and has some clarify issues, but still worth it.  A former coworker has the older glass lens version.

                              2. Mountable magnifying len – In comparison to the wearable glasses, a single mountable len may offer a larger view of your work area, but normally only available in a single power.


                              Both tools are individually worthy of a blog article, but a comparison blog would be better.


                              Regards, Gordon

                              7 of 7 people found this helpful
                              • 27. Re: Cool Tools To Giveaway for a Blog Review

                                i would love to test that esr meter i have a capacitance meter at the moment  but sadly only goes to 2000uf. I do a whole lot of work with audio circuits including designing and building my own audio circuits. I learned completely from just jumping in a doing, i didn't go to school for it and didn't have anyone else teach me other than the circuits that others had made that i literally learned from nothing on by experimentation. as i continued learning i would then look for tools that would help me either diagnose or interpret circuits and an esr meter has always been on my list but never knew what a good one or bad one would be and with very limited funds didn't want to buy a tool i knew nothing about when there have been so many other tools that were absolutely needed that took priority. I know this tool could help me by lessening the time taken to diagnose many problems i face day to day in part making my business more efficient and leading to growth. and growth is my main concern as of now. i would like to grow my business to a point that i could have an employee or two and maybe get a day off which i have not had in the last 3 years. getting to test one of these would allow me to see at least an example of a tool i know i could really use on a day to day basis. and i  have to say the coolest tool i own is made from a pen and a part of an old extendable antenna and obviously is homemade and its for retwisting the wires around posts in vintage amplifiers. i made this tool mostly because i didn't have the money for commercially made ones and had to finish my work on this customers amp so i just made one. yes i could have soldered the connections but i have found that doing so changes the sound of many amplifiers and i like to stay true to the original assembly Technics as much as possible.

                                • 28. Re: Cool Tools To Giveaway for a Blog Review

                                  Are they nut drivers?  I have a similar, but alas smaller, set that doesn't have the socket type bits...

                                  A bit nerdy but after seeing this last week I actually checked to see if my set had them over the weekend!

                                  1 of 1 people found this helpful
                                  • 29. Re: Cool Tools To Giveaway for a Blog Review

                                    Cool idea for working in tight space.  I am going to adapt this to my workbench as well.





                                    1 2 3 4