Raspberry Pi

2 updates since last visit
Profile Photo
Hi, I want to introduce our new din rail housing solution for the Raspberry Pi Pico - the RasPiBox Pico:     Comes in kit form. The pcb contains beside the breadboard area dc voltage regulator with 5V DC output and 9...35V DC input.   More Information
Profile Photo
Woo Hoo! Three cheers for Adafruit's Circuit Python.   A few months ago when I tried mp3 playback in circuit python I had no success, just a few seconds of gibberish audio (not even the length of the mp3). This was the original guide I followed: https://learn.adafruit.com/mp3-playback-rp2040    Whatever the issue was, they have pushed a fix… (Show more)
Profile Photo
I made a post about this Raspberry Pi focused project A Raspberry Pi project for childhood Educators...that doesn't cost a dime. and received some positive feedback. The event is open for another year. Maybe someone in the community is interested in participating.   There are two challenges for Astro Pi, ranging in length and complexity: Mission… (Show more)
Profile Photo
Hi,   I don't know if this is the best place to ask this kind of question, but I am following tbhs' directives. I need help with the raspberry pi camera. I have been looking all other google for help but nothing seems to work although a lot of people seem to meet the same problem.   I basically intent to use a raspberry pi camera ask a… (Show more)
Profile Photo
I recently have had an excuse to try writing a PIO program for the PI Pico. Aside from that, I have only copy-pasted the WS2812B PIO state machine code.   Although this maybe is maybe isn't the greatest example, but 4-bit interfacing with the HD44780 LCD controller does take a small amount of bit wrangling.   As a brief refresher in 4-bit mode… (Show more)
Profile Photo
I've Raspberry Pi 3 B, with the latest version of NOOBS and install Raspbian. Has performed RPI-update, apt-get update and apt-get upgrade. When I plug the Pi Cam V2 everything works fine. Then I switch to Noir V2 (using the same ribbon, replace only cam) and get the following error message: mmal: mmal_vc_comonent_enable: failed to enable… (Show more)
Profile Photo
Hi,   We have been using The AVNet Smartedge IIoT Gateway for a project for a while now. We have purchased a couple of dozen of these devices and use them with ethernet, canbus, HDMI and other protocols.   We are running a custom Raspbian image which was modified to boot correctly, and with the appropriate kernel modules updated and "grabbed"… (Show more)
Profile Photo
Hello. I have to pid control of the encoder motor position with rasberyy pi. but i don't know how to do it. Requested in the project: If the user enters 10 degrees, the engine will turn 10 degrees and stay there. then it will go to 200 degrees if it enters 200 degrees.  I need your help in this regard.
Profile Photo
Hi, I want to do a Raspberry Pi Certified Educator course in United Kingdom. Anybody knows dates and details?   Thanks,
Profile Photo
Hello, it is full of people here that are making home automation things in their spare time or as a hobby. I am also doing this and want to make the project bigger. It is called - webcontrol.link and it is a web application that is controlling raspberry pi connected to internet ant registered in the website of course, which has… (Show more)
Profile Photo
i have a dead laptop with 15 inch display and an old lenovo tab 3 7 essential. There is an idea but i don't know how much of it is possible. can i disassembly the android screen out of motherboard and connect the ribbon cable to raspi will it work? also can i use 15 inch display directly to the raspberry pi will that work?
in Experts Report
Profile Photo
Hi all !   Today, I'm going to share a "hack" that I use in my work when a printer (Laser A4 or labels - Zebra printers) doesn't has network connectivity or a network wall socket is not available - but WIFI is present. Using a Raspberry PI Zero W I'm able to share the printer with more than 1 client . To this day, I have 8 working without a… (Show more)
Profile Photo
Hi All,   I was wondering if anyone has had any experience using the CAN Controller on the SmartEdge IoT Gateway The box has a Built-in MCP2515 CAN Controller on board, which is great & why I selected it for a project that requires CAN   For the most part, it works fine, but every so often I'm encountering "Garbage" data coming from the… (Show more)
Load more items