I was searching for this list and finally found it! Yes, the top 10 Element14 community members as of April 2018. They truly deserve the spot. Do you have any thoughts on this? Let me know in the comment section below. There are few others too down the ladder who are helping and I don’t want to disapoint you. This top 10 list is just a list,… Show more
Last year we launched our successful ebook Essential Tips for Makers Series 1 full of #MakerTips from our amazing Community, Top members, Friends of the community and element14's The Ben Heck Show. .....I think its time for Series 2! From this week we will be posting all our best #MakerTips on social media using the Hashtag #MakerTips and…
i have made a 5 player lockout gameshow buzzer im using a audrino uno audrino is hooked up to a breadboard with 5 v from audrino goint to it all 5 buttons have 1.3kohm risisters on them the reset is on pin 2 ad does not go to the breadboard but goes straight to the button with earth pin 14 i think ? all buttons are hooked to each box… Show more
MEMBER COMMENTS WANTED on Real World FPGA Training and Development: Solving the Learning Curve Challenge with 5 Community Members
Greetings to all Members! (I hope everyone is having a great start to their summer. It's been warm in Chicago but still great weather.) The reason I am writing today, and inviting all the members of element14 to discuss, is to tell you about a project I have been working on. About a month ago, I had a discussion about it with our Top Members… Show more
12 total votes
I purchased a Raspberry Pi3 last week, after spending couple of days trying to get it to boot up I gave up and purchase another one. I am having the same issues, it just would not boot up, i.e. the green light does not lit -- which I think means that is Not reading the SD card to load the Operating System. This is what I have done so far: Used a… Show more
I have almost 100 boards in service. Of those 100, I had three out-of-box failures: 1 mechanical-intermittent, 1 rainbow-screen-of-death, and 1 does-not-a-damn-thing. I had my tech reflow all three on the chance that the failures are all due to bad solder. The mechanical-intermittent "recovered" but the other two are still scrap. The Pi is a…
Hello, I am using cy8ckit049-42xx. I am able to use capsense as a linear slider but not as a push button. Can anyone suggest what changes in the code I have to make to use it as a push button? Please help. Thank you.
You can do a lot in nine years... Another year, another day, and… another element14 birthday! And today, the element14 community turns nine years old. Happy Birthday, element14! There’s a lot you can accomplish by the time your nine years old (though we're still the best thing to ever happen to June 14th...). You could become a Microsoft…
Cool Tools: The Bench Awards! Design for a Cause element14 Essentials: SBCs BeagleBone Webinar Series Win Ben Heck's Portable Raspberry Pi Photo Booth! Project14: Smart Alarm Clock
113 total votes
58 total votes
I'm trying to find out if the Raspberry Pi Touchscreen enclosure comes with screws. The Part number is 2494691 but they are on sale at the moment (hence the 02 added to the end) http://nz.element14.com/multicomp/cbrpp-ts-blk-wht/raspberry-pi-touchscreen-enclosure/dp/249469102?st=raspberry%20pi%20t… I've received the one I ordered from… Show more
Load more items
Hello, I want to start designing my own circuits from scratch, but I don't know where to start. What do I need to know before I can start to do that?