Skip navigation
I have this plan to script an automated test setup. I want to check the behaviour of GaN power FETs. I'll need to control the input signals that drive the FETs, the load that the FETs see, and the measurement instruments. To make this possible, I bought a license for LabVIEW Home Edition. I used the coupon code that's available if you listen to The Amp Hour.   I'd like to automate measuring the behaviour of power FETs in a switched design. What's the effect of the switch frequency on ...
The element14 roadtests are a great way to learn new things. Whenever I see a test that interests me, I enroll. Success is not guaranteed. I've been selected for some, not for others. In this series I'll explain how I decide to enroll or not. I'll also show how I build my case, including some examples from my applications.   This is the technical part of my application for the Programmable DC Electronic Loads with the BK8600 All technical content is here. I've removed the part where I'm ...
Jan Cumps

LabVIEW Baby Steps

Posted by Jan Cumps Top Member Jun 15, 2016
I have this plan to script an automated test setup. I want to check the behaviour of GaN power FETs. I'll need to control the input signals that drive the FETs, the load that the FETs see, and the measurement instruments. To make this possible, I bought a license for LabVIEW Home Edition. I used the coupon code that's available if you listen to The Amp Hour. To make things complete I also need to be selected for the Programmable DC Electronic Loads with the BK8600.   I will go throug ...
There are many opinions on the good and bad of debugging. I use it constantly. My development is a constant round-trip between editor and debugger. I like to step through code in a debugger to grasp what's happening in firmware.   This blog explains how I set up my tool chain to debug the SensorTag Out-of-box firmware while the device is in a Bluetooth conversation.                The SimpleLink SensorTag is a tiny evaluation kit ...