Skip navigation
I 'm learning embedded Linux with a BeagleBone.  This time I'm using my Windows Desktop as the screen for my board.     Graphic Programs on a headless board.   XWindow and Preparation of the Windows PC  I'm going to run applications on the BB. These applications want to show a window and graphics. My BB doesn't have a screen. It will direct the graphics to my Windows laptop. The activity doesn't require any software installation on the BB. Everything is there. Yo ...
The series will use high-voltage FETs in half-bridge configuration. This time I look at the bridge's output signal. I'm particularly interested in the overshoot, because controlling that is one of the claimed advantages of GaN technology.   The high and low side of the bridge are controlled by an opposite signal. Both signals have a dead time inserted when one signal goes low and the other switches high. GaN semiconductors don't need a lot of dead time. The setup here is configured f ...
SimpleLink™ Sub-1 GHz Wireless Microcontroller - Check  Received Signal Strength SimpleLink™ Sub-1 GHz Wireless Microcontroller - Use SmartRF to Try Radio Configs SimpleLink™ Sub-1 GHz Wireless Microcontroller - Debug 2 LaunchPads at the Same Time SimpleLink™ Sub-1 GHz Wireless Microcontroller - Side Note: Recognise your PuTTY Sessions SimpleLink™ Sub-1 GHz Wireless Microcontroller - Side Note: Recognise your Code Composer Studio Sessions SimpleLink™ Sub- ...
Read more