Skip navigation
mcb1

ATTiny Fuse Resetter

Posted by mcb1 Top Member Oct 14, 2017
The other week I was playing with a Digispark clone, and it turns out that the suppliers have not programmed them correctly.     Let me explain When Erik created the Digispark, he wanted to use all 6 pins of the ATTiny85 for I/O. Because there is a bootloader, you can program them as per any other Arduino (slight differences but essentally the same), rather than having to use an ISP programmer.   The reset pin has been disabled via the fuse setting, and therefore becomes a norma ...