Skip navigation
Hello World!  In this Blog, I would like to share my experience on PYNQ-Z2: Embedded Vision Workshop (Zero to Hero) Series with Adam Taylor! Getting Started | Getting Up and Running  | Unlocking Your Inner PYNQ Hero  | Project14 | PYNQ Workshop   and my getting started experience with the PYNQ-Z2 board.     PYNQ is an amazing framework and is an opensource project by Xilinx. Reach PYNQ website at PYNQ - Python productivity for Zynq - Home   Now, comin ...
MicroPython  Interfacing Sensors  DHT-11 Sensor interphase with NodeMCU   At the end of this, you will be able to interphase DHT11 Temperature Sensor with ESP 8266 NodeMCU bare-metal and also by attaching external LED's. The whole process will be done by MicroPython programming. So, Let's begin with !     Note: You must have your MicroPython firmware pre-flashed onto your board before beginning with this. If not, follow up these before getting back here.   Micr ...
MicroPythonPulse Width Modulation & Duty Cycles   At the end of this, you will be able to implement PWM technique and see it on inbuilt LED in Pin2 of ESP 8266 and also by attaching external LED's. The whole process will be done by MicroPython programming. So, Let's begin with !   Note: You must have your MicroPython firmware pre-flashed onto your board before beginning with this. If not, follow up these before getting back here.    MicroPython #1: Introduction and G ...
MicroPython  Triggering Input / Output Ports     At the end of this, you will be able to trigger High and Low voltages to your I/O ports and see it on inbuilt LED in Pin2 of ESP 8266 and also by attaching external LED's. The whole process will be done by MicroPython programming. So, Let's begin with !   Note : You must have your MicroPython firmware pre-flashed onto your board before begining with this. If not, follow up MicroPython #1: Introduction and Gearing Up  be ...
MicroPython  An Inroduction and Firmware Flashing to the ToolMicroPython is re-implemented form of Python 3 programming language that is optimised to run on microcontrollers and in constrained environments. It is much similar to generic Python programming language. Simply said, MicroPython is Python for Microcontrollers. It only includes a small subset of the Python standard library. It also includes modules to access low-level hardware this means that there are libraries to easily access a ...