Skip navigation
    The IoT Stamp module is powered by Realtek RTL8710AF ARM Cortex M3 WiFi SoC running at 83 MHz. This module features same form factor and GPIO layout as of ESP8266 but lacks ADC input. But it features Up to 1x SPI @ 41.5 Mbps max Up to 3x UART with 2x up to 4Mbps, 1x @ 38400 bps Up to 4x PWM Up to 1x I2C @ 3.4 Mbps max Up to 19 GPIOs including 10 supporting interrupts. And it comes with 1 MB of flash and 512 KB of RAM. ---------------------------------------------------------------- ...
  This video is all about interfacing BMP180 module with Raspberry Pi. BMP180 will help us to measure environmental temperature  and pressure and by using that we can calculate the altitude which can be used in various applications like weather monitoring, navigation etc. The BMP180 sensor module comes with I2C interface and with a default address 0x77 which is not configurable limiting stacking of multiple modules to that same I2C bus. ----------------------------------------------- ...