Skip navigation
They claim and I quote "Loose Batteries can touch and lose power" are they nuts? This claim is about 1 minute in. Did the world of physics or electronics change??  In the words of PT Barnum "There's a sucker born every minute"         ...
Ok, First Remove the Three (3) Knobs. Next, Remove the Filter lens which has six (6) Allen screws (in Red). Now remove the five (5) screws (in Green) from the light plate itself. Next Insert s plastic kitchen knife and very gently pry the plate off as there is a power connector built-in. Now using a 9/16" nut driver remove the two rotary switches nuts, push them through and replace the hardware so you don't lose them. Also use a 9/8" nut driver to loosen the dimmer nut. Next, there are 4 ...

Filter Blog