Skip navigation
Hello,   ...   I was making some ideas come to life on GitHub.com. The two major items were related to BBBW and BBGW w/ the newer Capes available.   I used the MotorCape to make some motors move and the LoadCape to make some loads (motors) move around. I am still working on the LoadCape software.   These are actually some nice Capes. I found them to be trying at first but when things fit, they fit. You can look at github.com/silver2row/motocape and github.com/silver2row/l ...
Hello,   I have been messing w/ motors still. Here is a schematic of the motor driver I am using to set up some software you can find here at GitHub.com: https://github.com/silver2row/flack.       This is the L298 and other components from this dual h-bridge motor driver:     Here is some software to set up your motor driver w/ the BBB/BBG/BBBW/BBGW...     Enjoy!   Seth   P.S. If you have any questions or comments, please let me know. ...
Hello,   I just received my Seeed MotorBridge Cape for the BBG/BBB. It is all that humbug and more. I used some previously used software to make my servo turn but...dang! The servo did not turn like described in the instructions. I used GitHub.com to clone the software into my 2GB BBB with the Cape addition. I first used the BBG to make the servo turn but I had some type of complication. The complication was me of course. I did not fully understand how much power I had coming into the BBB/ ...
Hello,   I got things going a while back. I used AWS (Amazon Web Services) and some items from a starter kit for the BBG (Beaglebone Green). Good news...people updated things, I updated my working OS, and we got things "cracking." Besides those ideas, I have been working on making my first robot. I am stuck with the software right now. I am using eSpeak to communicate with my board via microphone.   I had some complications so far but as Mike Shovot says, "Keep going until you are go ...