5 Replies Latest reply on Apr 11, 2012 1:17 AM by Richard_H

    Eagle - handling Vcc and Gnd

    LargoLobo

      Hi Mark,

       

      The question: There is probably a simple answer to this, but I couldn't seem to get there. Most of the ICs in the Library don't have Vcc and Gnd pins on the layout. Once the IC is in the schematic, how do I add a bypass cap to Vcc, or in general, hook up the +5V and Gnd to the chip?

       

      John Wolf

      johnwolf.lobo@gmail.com