2 Replies Latest reply on Sep 14, 2021 3:14 PM by frederik1

    spacing between dimension and copper pour, how to set ?

      Hi,

       

      Is there a way to set the clearance between copper pour and the dimension of

      my board ? I did look for this setting in the manual/google/etc but no

      luck...

      Copper pour keeps a distance of 0.04 mill (1 mm) between the dimension

      outline of my board and the copper pour (I have defined the copper pour

      polygon outline bigger i.e. outside than my dimension rectangle).

       

      What I would like to achieve is that copper pour will just be flush with my

      dimension.

       

      Any idea's....?

       

      Thanks,

       

      Carel.

       

       

        • Re: spacing between dimension and copper pour, how to set ?

          Nevermind, I have found the setting....never expected it to be in a design

          RULE setting dialogue...distance tab:  copper-dimension 

           

          Carel.

           

          "pc5m" <pc5m@xs4all.nl> wrote in message

          news:hva9s2$50j$1@cheetah.cadsoft.de...

          Hi,

          >

          Is there a way to set the clearance between copper pour and the dimension

          of my board ? I did look for this setting in the manual/google/etc but no

          luck...

          Copper pour keeps a distance of 0.04 mill (1 mm) between the dimension

          outline of my board and the copper pour (I have defined the copper pour

          polygon outline bigger i.e. outside than my dimension rectangle).

          >

          What I would like to achieve is that copper pour will just be flush with

          my dimension.

          >

          Any idea's....?

          >

          Thanks,

          >

          Carel.