I have downloaded the matrix multiply example, but the documentation does not match the user interface in the SDK. Would you have time to help out with this?
I have found the appropriate starting locations for getting the board setup in the vivado & sdk tools. The original issue was due to the fact that the matrix multiply documentation is way behind in the sdk interface.
I just installed the SDSOC 2018.3 and downloaded the bare metal Matrix multiply 2018.3 from the Minized reference design page. However, I concur
the PDF file is not updated with the latest menu's/pull down actions from the SDSOC 2018.3.
Change the blue highlighted "SDx Platform Project' --> SDx Application Project. The text description in step 4 should also say Application in all places to be clear to the reader.
I initially went with the platform project and ended up messed during steps 13/14. I retraced my steps and found that step 4 figure needs to be fixed correctly to app project.
Thanks all! I've noted those changes for an update.
I wanted to let everyone know that we have published the Baremetal SDSoC 2018.2 MinIZed platform file.
You can find this in the downloads for reference designs on the dot org site.
Install instructions are located within.
You can get this by heading to the MiniZed reference designs page:
Then search for "SDSoC" and locate:
SDSoC Platform Support Packages
From there, download, extract, follow the install instructions and have fun!