4 Replies Latest reply on Dec 26, 2018 7:46 PM by kevinkeryk

    ULTRA96 FPGA programming + Petalinux application development

    u6113500

      Hi all,

      My PL + PS application works om bare-metal Ultra96 and I can built Petalinux for this board as well. Now I want to move my application to petalinux environment.
      How do I program FPGA and run C code in petalinux?
      Can anyone share his approach (or a tutorial) for PL programming and Petalinux application development?
      To program FPGA do I have to rebuilt BOOT.bin by using petalinux command below?

      $ petalinux-package --boot --fsbl components/plnx_workspace/fsbl/fsbl/Release/fsbl.elf --fpga hardware/design_1_wrapper.bit --pmufw components/plnx_workspace/pmu-firmware/pmu-firmware/Release/pmu-firmware.elf --u-boot

      where "design_1_wrapper.bit" is exported from my Vivado project?

      Do I have to generate FSBL and pmu-firmware.elf myself as well?

      Can I use SDK to program FPGA and run C applications on petalinux (ULTRA96 board SD card boot mode)?

       

      Thank you,
      Anton