0 Replies Latest reply on Apr 11, 2019 4:28 PM by josh_ncar

    PicoZed VIN=15V?


      I am using the PicoZed 7010 (rev. C and E) with a custom carrier card, currently using VIN=+12V supply but would like to move to +15V. PicoZed HW Guide recommends +5/12V and limits max VIN=13.2V, but board components (TLV62130 and caps) appear to support 15V. What is the VIN input limitation here, and can VIN=15V be supported?


      The impact on the switcher inductors appears small, and it appears that the 25V caps would be OK. Thoughts?


      Thanks... Josh