5 Replies Latest reply on Apr 20, 2020 5:18 AM by gmezzina23

    Ultrazed EG starter kit boot problems + jtag problems



      I have an Ultrazed EG starter kit which fails on boot with this serial output:

      Avnet modifying SDHCI0 and SDHCI1 registers for UltraZed SOM


      SERDES initialization timed out


      ================= In Stage Err ============

      Fsbl Error Status: 0x00000801

      Also the Vivado and sdk fail to recognize SMT2 jtag.

      Any one can give some advise? Thanks in advance.