We have many training materials out targeting the various Avnet platforms.
Are you using the ZedBoard itself, or some other Zynq based system?
I can help guide you to the proper training materials.
How to contact you about the training?
2 of 2 people found this helpful
You can contact your local FAE for support. The latest courses are currently listed on the Hackster.IO site:
You can check out the Ultra96 Introductory Courses
There are also many older Speedway training materials available on the ZedBoard.org site - although for anyone reading this in the future, that site is being depreciated.
A good resource may be the MicroZed Chronicles. Though eponymous to MicroZed they also cover other boards (e.g. MiniZed and Ultra96) and lots of other Zynq and Zynq MPSoC design topics. I must admit many of the MicroZed topics are, unfortunately, a bit dated now. The PetaLinux tools have changed quite a bit since then (2014) and now, so that may make it hard to follow them. The "episodes" specific to PetaLinux on the MicroZed start at #53.
Another good resource may be the Speedway course materials created for the MiniZed board. This is also a Zynq-based dev board, and these tutorials use the more recent Vivado and PetaLinux 2017.4 tools:
I hope this helps!
I want to do the experiment about PS and PL on Zedboard.
Now, I want to send some easy signal (e.g. 10101010) from my notebook through the Ethernet to Zedboard PS, and do some easy operation on PL.
Finally,I can set the constrain file and use the logic analyzer to check my signal.
But I am not family to Zedboard PS and PL. Does anyone can help me some directions or example to learn?