we are looking for the same information here also
Please, what's the documentation you are referring to?
Do you have root access to the SmartEdge?
2 of 2 people found this helpful
Hi Marcello ,
To be honest i succeed to boot an Buster image on the smartedge IIOT Gateway . However i have to copy kernel7.img , bcm2710-rpi-custom.dtb and dt-blob.bin from boot slice of smartedge official image to the same on Buster image.
I encountered some trouble with bluetooth but i think i could resolve it later
Regarding the documentation, all i have is what you can find here : SmartEdge Industrial IoT Gateway Solution - Connects to Innovate
For root access , of course yes . You only have to enter "sudo -i" or "sudo su -" from avnet session.
Thank you Olivier,
tomorrow I should finally have my SmartEdge in my hands (purchased in Poland) and I could start my tests.
I have almost working actual version of U-Boot (discarding TPM support for now, but is should be quite easy to fix) and was able to partially boot Debian Buster arm64 image (https://wiki.debian.org/RaspberryPiImages). Systemd and non-free blobs got in my way, but I may be able to win soon ...
I'll upload relevant repositories to Github soon ...
it seems a good result!
I am becoming familiar with this beautiful box and I hope to get into the fray soon ;-)
I look forward to hearing from you,
1 of 1 people found this helpful
Do you have success?
I'm trying to create a fresh image using buildroot, but I'm not able to have it running.
The closier I got is boot the original file system with my kernel, but I was not able to have the Wi-Fi working. Also I don't have nothing about the ATTiny in dmesg.
Do you have any clue?
Best Regards, Luan
From my understanding , if you compiled an official Raspbian image you have to adapt bcm2710-rpi-custom.dts because the avnet board does not address all components as Raspberry does.
@Petr : got news?
I'm seeking a way to boot on official Raspberry image based on Debian Buster Lite on Smartedge IIOT Gateway.
Does someone succeed to do that ?
I 've followed spreed instructions provided in available documentation but nothing seems to work.
I also tried to create an image with another version of u-boot and kernel image but have the same result nothing boot at all.
Any doc will be appreciated