2 of 2 people found this helpful
Does the blue DONE LED turn on?
Yes, the problem could be a corrupted or defective SD card. Can you try using a different SD card?
Yes, it was a SD card error, Thank you!
I was provided the link to this site by an E14 Community member some months ago. https://www.sdcard.org/downloads/formatter/
Unfortunately, I am unable to find the link to give the Samaratin the credit. Let consider this a pay it forward transaction:)
My experience with the tool is with two cards. One worked after using the tool and one did not. Unfortunately the tool is only supported in the O/S that offers the blue screen of death feature.
I'm using an UltraZed IO Carrier Card. I have used my custom Petalinux with no problems. But since yesterday, I don't know why, it doesn't boot from the SD Card. Also I have tried with the UltraZed IO Carrier Card - Out of Box Design
1. Format SD card to FAT32.
2. Copy files to SD card.
3. Set switch [1:4] to OFF,ON,OFF,ON
but I have the same result, the serial output is empty and PS on-board user Red LED is fixed and doesn't flash. Could the SD card be damaged?