2 Replies Latest reply on Jan 18, 2021 2:24 PM by dimiterk

avnet ultra96 onsemi dual mipi camera datasheets

dimiterk Jan 16, 2021 1:43 PM

Just a couple of questions:

1.Has the AP1302 datasheet become available?

2.What about AR1335?

How would one go to implement a baremetal design without these. I would prefer to design a PYNQ package for this card as there is none available at the moment.

Re: avnet ultra96 onsemi dual mipi camera datasheets

ctammann Jan 17, 2021 12:45 PM (in response to dimiterk)

Hi, so the datasheets for these devices are only available under NDA. If you'd like to direct message me I can get you in touch with the right people to request them. For the 1335 because of the resolution increase over the 0144 only a single camera is supported on the mezzanine. The hardware design without petalinux is posted to our github repository, check out this blog I put together on building that design and let me know if that is helpful - https://www.element14.com/community/groups/fpga-group/blog/2020/12/16/ultra96-v2-on-semiconductor-dual-camera-mezzanine-…
Like (0)

Reply

Actions
- Re: avnet ultra96 onsemi dual mipi camera datasheets
  
  dimiterk Jan 18, 2021 2:24 PM (in response to ctammann)
  
  Hi,
  
  I read your articles and I can recreate the HW design but there is no info on the image co-processor apart from a kernel driver.
  I wanted to access the image streams for each camera separately.
  
  Basically I'm interested implementing a baremetal solution and a PYNQ package if possible for the road test. I can sign an NDA and release the driver as an array with magic numbers.
  Also, on the schematics the LS and HS connectors text are flipped.
  
  Like (0)
  
  Reply
  
  Actions

Go to original post Reply to original post