4 Replies Latest reply on Mar 31, 2021 12:52 AM by bi̇rsen

    make_uz3eg_iocc.sh file does not generate bitstream

    birsenguler

      Hi,

      I work with avnet ultrazed 3EG IOCC board. I tried to create BSP file by using make_uz3eg_iocc.sh and after that I want to create petalinux project from bsp file. But there is a error when generating bitstream in Vivado 2020.1.

      I work with Vivado 2020.1 and petalinux 2020.1, also ubuntu 18.4.

       

       

      My work flow is:

       

      cd ~

      mkdir -p git/avnet

      cd git/avnet

      git clone git://github.com/avnet/bdf.git -b master

      git clone git://github.com/avnet/hdl.git -b 2020.1

      git clone git://github.com/avnet/petalinux.git -b 2020.1

      cd /home/peta-dev/git/avnet/petalinux/scripts

      source /home/peta-dev/Xilinx/Vivado/2020.1/settings64.sh

      source ~/petalinux/settings.sh

      ./make_uz3eg_iocc.sh

       

       

      I encountered this error:

      ***** Wait for bitstream to be writen...
      [Mon Mar 29 13:20:16 2021] Waiting for impl_1 to finish...
      /home/peta-dev/Xilinx/Vivado/2020.1/bin/loader: line 286: 6390 killed "$RDI_PROG" "$@"

       

       

      I check RAM in my Ubuntu PC :

      peta-dev@petadev-Lenovo-Y520-15IKBN:~$ free -h

                      total      used      free      shared      buff/cache available

      Mem:      15G      2.0G      11G      645M      1.9G           12G

      Swap:      2.0G      0B      2.0G

       

       

       

      When vivado synthesise:

      ***** Wait for bitstream to be writen...
      [Mon Mar 29 13:20:16 2021] Waiting for impl_1 to finish...
      /home/peta-dev/Xilinx/Vivado/2020.1/bin/loader: line 286: 6390 killed "$RDI_PROG" "$@"

       

      Again I check RAM in my Ubuntu PC :
                      total        used      free     shared   buff/cache available
      Mem:      15G        14G       143M   301M    420M          34M
      Swap:      2.0G      1.5G      537M