Skip navigation
>

TinyDVMPart2 Medium

Description:

Part 2 of the TinyDVM project for Element14. This shows the Arduino MKR 1010 WiFi and Sparkfun Micro OLED Breakout board connected together. Then an initial 3D printed case is considered but this had some problems so a second slightly larger version, with a bexel, was printed.

This video is embedded in the following content:
Project14 | Test Instrumentation: Meet the Do-It-Yourself Test Equipment Projects!
Project14 | Winners Announcement: Tool Kits for Do-It-Yourself Test Instrumentation!
Project14 | Volunteer to Judge the Test Instrumentation Competition!

Comments